◆ Forward Baggage Door - Decided to install with the hinge at the bottom of the door so the door swings down. This way I don’t have to hold the door open. We will see if this turns out to be a good decision or not in time.
◆ Radiator access - I thought about how I would access the Petcock drain on the Radiator and the hose/clamps behind the radiator if needed to be serviced/replace.
• As there were no plans for this in the drawings/instructions I decided to install inspection panels at the bottom of the plenum and the fiberglass belly to have access to the Petcock drain.
• Added inspection panels on the top of the plenum behind the radiator to gain access to the radiator hose/clamps.
◆ Rear Baggage Floor - Made the floor removable to have access to the top plenum access panels and hose/clamps.
◆ Rear Baggage back wall - Made left side removable to have access to the Battery and hydraulic pump.